Any advice to draw this following HVAC System

Help and discussion on using the Detailed HVAC option

Moderator: DesignBuilder Support

Nattakorn
Posts: 1
Location: Bangkok

Any advice to draw this following HVAC System

Postby Nattakorn » Thu Mar 08, 2018 4:40 am

Hello guys,

I am trying to build a detailed HVAC system for my model. My project is non-residential with over 50 floor and I am getting stuck with how to put all of this equipment in Design Builder as per Central Plant.

- 800 Tr Water cooled chiller (x 3)
- Fluid to Fluid Heat Exchanger (x 3) *main problem
- 5.5 kW: Two speed fluid - Cooling Tower (x 14) **main problem
- Pumps is fine and no Hot system Loop

Is it possible to draw all of this in Detail HVAC System with no error. Currently I use the HVAC Template: "System No. 8 VAV with PFP Boxes" that is similar to above but It not correct for amount of equipment as real design.

Please advice.

regards,
msweeney0312
Posts: 5

Re: Any advice to draw this following HVAC System

Postby msweeney0312 » Fri Mar 09, 2018 2:57 pm

It's unclear what the point of the heat exchangers is, but I'm assuming it's for Free Cooling? There's some documentation on how to implement these here:

http://www.designbuilder.co.uk/helpv5.2 ... light=heat exchanger

If this is the case, I'd try the "FCU 4-pipe, Water-cooled Chiller, Waterside Economiser template." That should get you most of the way there, and you can add on any number of chillers/towers you want--although sequencing them might be tricky and you should be able to play around with that on the loop level.

Return to “EnergyPlus HVAC”

Who is online

Users browsing this forum: No registered users and 8 guests