Printing the HVAC system model

Help on setting up the building geometry, including importing from BIM

Moderator: DesignBuilder Support

thiruvenkadams
Posts: 1

Printing the HVAC system model

Postby thiruvenkadams » Sun Aug 05, 2018 1:31 pm

I have modelled complete HVAC systems for 7 typical types of buildings with a district cooling plant.

I wanted to take a high-quality PDF or print out of the modelled HVAC schematic to be added in the report.

but on doing so with exporting the image is not of a good quality and visibility of the flows.

anyone can suggest me the better way to do this.
Luis Sousa
Posts: 340
Location: Stroud

Re: Printing the HVAC system model

Postby Luis Sousa » Thu Sep 13, 2018 4:07 pm

Hi

One approach would be to zoom in to each section of the HVAC to a point where you can clearly see the flow arrows and capture the screen. The use MS Paint to compile the HVAC sections in one single image.

BR,
Luis

Return to “Geometric Modelling”

Who is online

Users browsing this forum: No registered users and 1 guest