wall thickness greater than 0,5m in constructions

Help on setting up the building geometry, including importing from BIM

Moderator: DesignBuilder Support

NoraMakait
Posts: 2

wall thickness greater than 0,5m in constructions

Postby NoraMakait » Thu Jul 09, 2015 8:08 am

Hello,
I'm trying to modell the constructions of different walls. Some of these walls are thicker than 0,5m. I'm using the layer option for that. When the wall is thicker than 0,5m there is allways an error saying the wall should not be thicker than 0,5m.
Does anyone know were this is coming from and how this maximal thickness of constructions can be changed?
Luis Sousa
Posts: 328
Location: Stroud

Postby Luis Sousa » Mon Aug 10, 2015 2:31 pm

Hello,

In DesignBuilder v4.2 the work around for the 0.5m restriction is to assign 2 layers of the same material to the construction.
Just to let you know that this limitation has been remove from v4.5 betas and will be available on the next v4.5 release.

BR,
HerbeMannABg
Posts: 6
Location: Poland

wall thickness greater than 05m in constructions

Postby HerbeMannABg » Fri Oct 20, 2017 2:13 am

In DesignBuider, the partition wall will always split the thickness equally to each side.

Regards,

Return to “Geometric Modelling”

Who is online

Users browsing this forum: No registered users and 1 guest